Summary:
Adani Wind has begun producing 91.2-metre turbine blades and secured certification for its MWL185-5.0 MW platform. The milestone strengthens domestic manufacturing, but investors should track external orders, ALMM-Wind status, capacity expansion, utilisation and returns before assessing its earnings contribution.
ANIL’s Mundra facility begins rolling out 91.2-metre blades for the MWL185-5.0 MW turbine, expanding addressable low-wind sites as the company scales manufacturing capacity.
Adani New Industries has started manufacturing 91.2-metre onshore blades at Mundra and obtained certification for its MWL185-5.0 MW turbine platform. The move expands the addressable market for larger machines in lower-wind sites while the group scales blade capacity from 2.25 GW toward a longer-term 10 GW target.
The 91.2-metre blades are the longest produced in India. They equip a turbine with a 185-metre rotor diameter—the largest currently claimed domestically—and a 140-metre hub height. Swept area reaches nearly 26,600 square metres, more than three and a half football pitches. Larger rotors capture more energy at lower wind speeds, which matters in a country where a sizable share of untapped resource sits outside the traditional high-wind corridors of Gujarat and Tamil Nadu. Adani Wind’s CEO noted that the combination improves capacity utilisation factor and makes a wider set of sites commercially viable.
Certification of the MWL185-5.0 MW platform removes a key gate for volume production. Adani Wind already has other models listed under the Ministry of New and Renewable Energy’s Approved List of Models and Manufacturers. The new platform builds on earlier work with German technology partner Wind2Energy. A prototype had been commissioned earlier in the year; the November announcement confirms serial readiness. Current Mundra blade output covers shorter lengths (78.6 m and 80.5 m). Adding the longer design requires advances in composite materials, structural engineering and handling logistics.
Manufacturing scale is the other half of the story. The facility currently supports about 2.25 GW of annual blade capacity, or roughly 450 sets. Plans call for a phased increase to 5 GW and a longer-term ambition of 10 GW. That ramp sits inside Adani New Industries’ broader new-energy footprint, which also spans solar manufacturing from polysilicon through modules. For Adani Enterprises, the parent, ANIL is one of the incubation verticals that brokers typically value in sum-of-the-parts models alongside airports, data centres, roads and primary industries. Recent external orders have already crossed 1 GW from independent power producers. One recent batch alone totalled 696 MW across customers including Purvah Green Power, Jindal India Power and NTPC Renewable Energy, covering projects in Karnataka, Gujarat and Maharashtra.
The commercial logic is straightforward. Higher-rated machines with longer blades reduce the number of turbines needed for a given project capacity and improve energy yield on moderate-wind sites. That supports better project economics for developers and, over time, higher utilisation of Adani’s manufacturing assets. India’s wind market has already shifted toward multi-megawatt machines; several domestic and international OEMs now offer platforms in the 5 MW range. Adani’s ability to produce the blades domestically aligns with localisation requirements that influence eligibility under ALMM and various bidding frameworks.
3 Things Investors Will Watch
Investors will watch three things.
- The pace at which the longer blades and the certified 5 MW platform convert into firm orders and production volumes.
- Progress on the capacity expansion itself and any associated capital expenditure.
- Whether the new platform gains timely ALMM listing for the specific configuration, which would widen its addressable project pipeline.
Existing orders provide a base, but the step-up in blade length is material only if it translates into sustained demand and operating leverage at Mundra.
The announcement does not change near-term reported earnings at the consolidated Adani Enterprises level. It does reinforce the operational trajectory of the new-energy vertical that several sell-side models already assign a meaningful share of enterprise value. Execution on orders, capacity ramp and certification timelines will determine whether the milestone moves from technical progress to measurable contribution in the incubation portfolio.
• 91.2-metre blades enable 185-metre rotor diameter and ~26,600 m² swept area.
• Certification clears serial production of the MWL185-5.0 MW platform.
• Mundra blade capacity stands at 2.25 GW with phased expansion planned to 5 GW and longer-term 10 GW.
• Cumulative external IPP orders already exceed 1 GW.
The stock’s reaction will depend more on the broader Adani group narrative and upcoming airport and data-centre milestones than on a single manufacturing update. The blade production start is a concrete step in the wind side of the new-energy story. Whether it compounds into higher volumes and better returns depends on order conversion and the cost curve at the scaled Mundra facility.









